MICS-5524 Air Quality Gas Sensor Module Carbon Monoxide Methane MICS5524 Detection Module

Description

Features:
1. Mics-5524 is a robust MEMS sensor for indoor carbon monoxide and natural gas leakage detection, as well as indoor air quality monitoring, breath detector and early fire detection.
2. Please note that this sensor is sensitive to CO (? 1 to 1000 ppm), ammonia (? 1 to 500 ppm), ethanol (? 10 to 500 ppm), H2 (? 1 to 1000 ppm) and methane / propane / isobutane (? 1000 + + ppm). However, it cannot tell you which gas has been detected.
3. The distribution board is not suitable for any safety, medical or finished use. We sell it for amateur education and experimentation, and we do not guarantee that it will be used for any other purpose! All gas sensors need to be calibrated for output.
4. Easy to use: use 5 VDC power supply, and read the analog voltage from the output pin. When a gas is detected, the analog voltage will increase in proportion to the detected gas. When energized, the heater draws approximately 25-35 ma. You can use the EN pin to turn it off (pull it up to 5V to turn it off) to save energy. Just make sure to wait one second after turning on the heater to make sure it is all heated before reading.
5. Each order comes with an assembled and tested mics-5524 connector and some connectors. You need to make some light welding to connect the plug to it - or just use ordinary wires.

Package Included:
1 * mics-5524 air quality gas sensor module